FLUKE 325 TRUE RMS CLAMP METER 400A A/C
True RMS measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.
The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts.
These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments.
The Fluke 325 also offers DC current and frequency measurements.
| AC Current | Range | 40.00 A / 400.0 A |
| Accuracy | 2% ± 5 digits (45 Hz to 65 Hz) | |
| 2.5% ± 5 digits (65 Hz to 400 Hz) | ||
| DC Current | Range | 40.00 A / 400.0 A |
| Accuracy | 2% ± 5 digits | |
| AC Voltage | Range | 600.0 V |
| Accuracy | 1.5% ± 5 digits | |
| DC Voltage | Range | 600.0 V |
| Accuracy | 1.0% ± 5 digits | |
| Resistance | Range | 400.0 Ω / 4000 Ω / 40.00 kΩ |
| Accuracy | 1.0% ± 5 digits | |
| Continuity | ≤ 30 Ω | |
| Capacitance | 0 to 100.0 μF / 100μF to 1000 μF | |
| Frequency | 5.0 Hz to 500.0 Hz | |
| AC response | True-RMS | |
| Backlight | Yes | |
| Data hold | Yes | |
| Contact Temperature | -10.0°C to 400.0°C (14.0°F to 752.0°F) | |
| Min/Max | Yes | |
| Size | H x W x D (mm) | 207 x 75 x 34 |
| Max Wire diameter | 30 mm (600 MCM) | |
| Weight | 283 g | |
| Category rating | CAT III 600 V | |
| CAT IV 300 V |